|Rated Power||5000VA / 5000W|
|Maximum PV Array Power||4000W|
|MPPT Range @ Operating Voltage||120VDC~450VDC|
|Maximum PV Array Open Circuit Voltage||450VDC|
|Maximum Solar Charge Current||80A|
|Maximum AC Charge Current||60A|
|Maximum Charge Current||80A|
Please note that these inverters cannot be paralleled.
Operation without battery possible.
2 Item Items
Warning: Last items in stock!
Est. availability date:
The Synapse 5.0+ is equipped with an MPPT solar charge controller to maximize and regulate DC power from the solar array for charging the battery bank. Transformerless design provides reliable power conversion in compact size. The pure sine wave output enables easy start ups for motor-type loads such as refrigerators, motors, pumps, compressors and laser printers as well as electronic loads like TVs, Computers, power tool and battery chargers.
12-month manufacturers carry in warranty.
|cheslyn on 17/02/2021|
Hi. Can one connect 2 Synapse 5.0+ in line to up the kw draw from 5 - 10.
|Jacques on 01/02/2021|
Hi,i have 5kw goodwe grid tie inverter with 5 x 300w solar panels,i also have 5kw synapse with 4 200a/h batteries as backup ( loadshedding),can i connect them so that if eskom power stops the synapse uses the goodwe inverters solar panels to charge the batteries on the synapse.
Hi Jacques. Only if you put in some kind of manual DC switch to switch the panels through to your Synapse.
You wouldn't need to change the panel arrangement though.
|Mike Chiz on 24/01/2021|
Good day sir Please help. What size of battery disconnect, pv breaker must i use fr synapse 5.0+
Hi Mike, the short answer is this for the batteries: https://www.solar-shop.co.za/accessories/123-keto-04.html
|Johan on 08/12/2020|
Good day Can i parallel the two outputs of two inverters Like two 5kw inverters (220v) Will it increase total output to have 8kw Or should the two kept separate from each other Thanks
|Johan on 25/09/2020|
I'm currently running the Synapse 5.0+ inverter with 8kv lithium ion battery and 10 Canadian 330W panels. 5 in parallal and 5 in series. Can I improve by adding additional panels. Your suggestion would be highly appreciated. All 10 panels are fitted in line getting full sun exposure from 8am to 5pm. Kind Regards Johan
Hi Johan, yes you could add another 4 panels or so if you choose to. Whether this will help you or not will be down to your ability to utilise the additional production, either in realtime on the load output or charging the battery.
|fanny on 15/07/2020|
can this inverter take a pv array of 4.9kw? voltage and amps within range
Hi Fanny, yes you can easily have an array of that size without damaging the inverter,
However it will clip the peak power production at 4,000W and never give you more than that.
Over-sizing the array like this is standard practice in the solar industry as thsi helps "bring up the sides" of the solar power rpoduction curve
|Mark Richards on 06/02/2020|
Hello Is this inverter able to receive two string inputs from panel strings on different parts of the roof (North and West facing)? Thanks
Hi Mark. This inverter only has one MPPT. Therefore all panels should be as near as possible to each other and facing in the same direction in order to maximise production.
If you have North and West facing panels on a single string you will pull the array down to match the lowest performing panels
|Annette Rogers on 02/11/2019|
Should my inverter turn off at any time or does it run all day and night?
Hi Annette, it will run as long as there is a power source (be it solar, batteries or electricity) to power it.
|Carl Barnard on 29/09/2019|
How accurate is the Synapse monitor ie % battery charge?
Hi Carl. Not very. It's like most other Voltronics inverters in that it estimates battery charge based on the voltage of the battery, which is not the best way to do it, but is a widely adopted method in cheaper inverters.
|Anti on 05/08/2019|
Is the SYNAPSE 5.0+ Off-Grid Inverter compatible with the Pylon US3000 3.5kWh Li-Ion Battery? Thanks
Hi Anti. Yes, absolutely. It's just a rebranded Axpert.
Pylon battery cable accessory kit for use with...
Robust and secure battery disconnection with...
90 degree bracket for longitudinal mounting
Pylon US2000 2.4kWh Li-Ion Solar Battery (excl....
6 mm², single-core, black, 25m NEW H1Z2Z2-K...
A set of battery brackets which allows vertical...