Sunsynk 5kW Hybrid Inverter - works with Pylontech, BYD and others.
Wifi dongle incuded.
2 Item Items
Warning: Last items in stock!
Est. availability date: 19/04/2021
The inverter has excellent efficiency and performs above 97%.
It is easy to install and has a clear touch screen where you can programme and read the system status. Added to the inverter is a Wi-FI port to allow the user to monitor the inverter via the internet.
• Maximum efficiency of 97.5% with wide input range
• Double MPPT design with precise MPPT algorithm
• Natural cooling- IP65 protection
• Compact and light design for easy installation
• Transformer-less GT technology
• RS485 Wi-Fi interface
• Built-in protection features
• Built-in anti-overflow function
• 25 years lifespan
|Matthew on 07/05/2021|
Do these allow for parallel operation e.g 2x 5kW systems to sum up to 10kW, this is for extra reliabilty in a remote off grid location incase one fails.
Hi Matthew, yes the units can be paralleled.
|Bruno on 15/04/2021|
Hi, do I need to purchase a communication cable with this, to use it with the pylontech 2.4kw battery? There is a battery cable kit on this site, but it mentions that the communication cable is no longer included.
Hi Bruno, no. The Sunsynk comes with a CAN cable you can use for this purpose.
|Yash on 16/02/2021|
Hi, thanks for the answer. So i i assume if the demand is more than 30 minutes and greater than peak, i.e. between 5-8kw, it will then switch to grid completely meaning it wont split the load (5kw solar and 3kw grid). For the 8kw, what is then the peak?
That is correct, yes.
The 8kW has a 190A pass through, which is much larger than any standard single-phase household feed.
|Yash on 15/02/2021|
Hi, what happens if power demand is greater than 5KW, say 8KW. Can it pull the extra 3KW from the grid?
Hi Yash, it will operate normally up to 5000W. Then up to 5500W for half an hour. Between 5.5kW and 8kW it will switch over to pass through and use only electricity. Above 8kW it will shut down completely.
|Lloyd on 13/02/2021|
Can the Sunsynk 5kW Hybrid inverter operate and supply power to the house without AC power from the Grid?
Hi Lloyd, yes it can.
|Diarmaid on 14/01/2021|
Is the Sunsynk inverter on the City of Cape Town approved supplier list? Is it interchangeable with the Deye inverter? Thanks, Diarmaid
Hi Diarmaid, yes and yes (Deye and Sunsynk have slightly different interfaces but are the same machine physically).
You can find the City of Cape Town approved inverter list here
|Boet Joubert on 10/09/2020|
Is there software to monitor, manage and store data to evaluate performance
Hi Boet, there is, yes. You can set up an account here: https://home.solarman.cn/login.html
|Louis Viljoen on 27/08/2020|
Does the Sunsynk inverter have two MPPT trackers? Is it transformerless? Does it have a heat sink or fan or what cooling system does it have?
Hi Louis. Yes, 2 MPPT's, transformerless and fans for cooling.
|Phillip on 12/08/2020|
Regarding the pass through of 35A, is this in addition to the inverter's 25A for a max output of 60A total? Or is the total maximum 35A?
Hi Phillip, it's a max of 35A.
|Rossouw Goosen on 11/08/2020|
Good Day, So the WIFI Module is include? What is the warrantee on the unit?
Hi Rossouw, yes the wifi dongle is included. The manufacturers warranty is 5 years.
|Frank on 02/08/2020|
I assumed that this inverter can only handle a peak power of 200% capacity for +- 10 seconds. Yet is says Peak power off-grid is 2 times the rates power. So what is the peak power on-grind? Or is it the same? What I also don't understand is that the spec sheet said Max Continuous AC passthrough (A) = 35A. Does this mean that if the normal rating of 5000Watt is exceeded for to long then it will "by pass" and only use Grid power to support a load of up to +- 8000 Watt (35 Amp)? Or is the Max power on-grid over 10000watt? Also why does the spec sheet say that Rated AC Output is 5000W, but Max AC. Power is 5500w? Does this mean that it can handle 5500Watt load continuously?
Peak power = 10kW for 10 seconds
Passthrough @ 35A refers to when the inverter is connected to grid power. In this case the backup load can pull 35A e.g. 35A @ 230V = 8.05KW
Rated power = 5kW (this is your max continuous draw in backup mode (during grid failure)
Max power = 5,5kW should not be operted at this level for more than 30 minutes.
90 degree bracket for longitudinal mounting
NH Fuse-link 125A for KETO-00
Pair of red and black 35mm battery cables (1...
Canadian Solar 410W Super High Power Poly PERC...
4mm2 single-core DC cable 25m - Red
VarioSole+ Rail connector for rail 41 x 35 mm