Pylontech US2000 2.4kWh Li-Ion Solar Battery (excl. brackets)

Hi Gary. the price is for a pair of brackets. You need one pair per battery. The batteries come with small link cables to connect to each other.

Hi Sean the battery dimensions are 442*410*89mm and is designed to be mounted in a 19" rack, although support for the weight is required.

Hi Craig. It is 50Ah x 48V = 2.4kWh. It is compatible with Axpert 48V inverters, although it will only communicate directly with the VMIII model (either Kodak or Mecer or RCT) or the King.

Hi Mpho. The size of the inverter is not the determining factor. Your battery requirements will be determined by the size of your load (in kW) and duration that you wish to run the load for.

Let us know what that is and we can assist in sizing the batteries correctly.

Hi Charles,

Storage capacity of 4 x 200Ah batteries = 4 x 12 x 200 *0.5 = 4,8kWh at the recommended DOD of 50% (Actual storage capapcity also depends on a bunch of other factors like operating temp and size of current draw)

Storage capacity of 2 x US3000 = 2 x 3500Wh x 0.8 = 5,6kWh at the recommended 80% DOD. So 2 x US3000 will give you 16.6% more run time on the same load.

BUT 2 x US3000 will only deliver 3.5kW of peak power through the batteries alone. Lead-acid can deliver much higher instantaneous power but to the detriment of the longevity of the lead-acid batteries.

Hi Godwin. Yes you can mix the US2000 and the US3000

Hi Jo, no you need to purchase a single cable set per set of batteries, i.e. you need one cable pack whether you have 1 or 5 batteries in your system. The are no wall mount brackets, but we do sell a wall mount box, that can house 2 x US2000's. You can find it here: https://www.solar-shop.co.za/cabinets/305-pylontech-vertical-wall-mount-45u-2-x-us2000b.html

Hi Warren. Yes, it is. However if you want to be able to extract all the information from the batteries BMS (in-built software) system accurately, you should use either this Kodak version of the Axpert: https://www.solar-shop.co.za/voltronic-axpert-inverters/269-kodak-solar-off-grid-inverter-vmiii.html or this one:
https://www.solar-shop.co.za/voltronic-axpert-inverters/270-kodak-off-grid-inverter-king-with-ups.html

Hi Joe, the Pylontechs only work on 48Vdc, so you'll need a 48V inverter. No problem adding an additional battery at a later stage

Hi Andries, Approximately 1 hour. 2.4kWh x 0.8 (DOD) = 57 minutes

Hi Marius, based on a 50% DOD on your existing batteries you would need between 3 and 4 of the Pylons.